This Centreville backyard already had good bones. The deck frame was solid, the posts sat on concrete bases, and the layout wrapped around a stone fire pit with steps down to a flagstone patio. Client loved the current layout making this a perfect retrofit candidate. So, we kept the structure and rebuilt everything you see and touch: 902 square feet of TimberTech composite decking, new black railing with a wood-look drink rail, cascading steps with built-in lights, and a herringbone border around the fire pit.

Why we Retrofitted instead of Rebuilding
A retrofit keeps the existing frame and replaces the surfaces, so you get a new-looking deck for less time and a smaller budget than a full tear-out. It only works when the structure is sound, so that was our first stop.
- Joists: 2×8 and 2×10 (the 2x10s run under the fire pit level), spaced 16 inches on center, which suits composite decking.
- Posts: the 6×6 posts sit on concrete bases with post bases, so they stay clear of ground moisture. We saw no sign of rot on the site visit.
- Joist tape: every joist got a cap of joist tape before the new boards went down, to shed water and protect the wood that stays in service.
- Attachment: the deck stays ledger-attached to the house at about 4 feet off the ground.
Keeping the frame also meant the homeowners kept the shape they already loved: the angled corners, the fire pit level and the wide steps (we did rebuild all stairs) down to the patio.

Dark Cocoa boards with an English Walnut border
The main surface is TimberTech Prime Plus in Dark Cocoa, a deep brown that hides dirt and pairs well with the gray stone. The boards now run parallel to the house, a new layout that makes each level read wider.
- Picture framing: the whole deck is picture-framed in Dark Cocoa, so no cut board ends show at the edges.
- Divider boards: the upper level adds divider boards to break up the long runs.
- Fire pit frame: the border around the fire pit is TimberTech Vintage English Walnut, two boards wide, laid in a herringbone pattern. The lighter walnut tone frames the stone like a rug. English Walnut is a slightly different board thickness from Prime Plus, so we planned the transition with the homeowners up front.
- Fascia and trim: Dark Cocoa to match, so the edges look finished from the yard.

Black railing with a Walnut drink rail
The railing is TimberTech IRX in black, an aluminum system with slim balusters that keeps the view open to the yard. It uses 3-inch black IRX posts, and we packed out the far left rim joist to give the posts on that side solid backing.
On top sits a TimberTech Vintage English Walnut drink rail, laid post to post. It ties the railing back to the fire pit border and gives everyone a place to set a drink. Under the rail, one In-Lite Fusion 22 light per section washes the deck surface with a soft glow after dark.
The basement stairwell got the same treatment: black IRX railing with a walnut drink rail, plus a special-order 19.5-inch section that sits on top of the retaining wall.

Cascading steps, lights and Hidden storage
The deck steps down to the yard on several sides through wide, cascading box steps. They are built so wide and shallow that no separate grab rail is needed, and they double as extra seating during a party.
- Riser lights: every step has a light set into the Dark Cocoa riser, so the path down to the patio is lit at night.
- Access doors: we built three access doors into the skirting from Vintage English Walnut boards, so the space under the deck works as storage for cushions, hoses and tools.
- Access hatch: a hatch built into the deck surface gives quick access to what sits below.
The result is a deck that looks as good from the yard as it does from the kitchen window, and works at night as well as during the day.


Common questions
Can you put new composite boards on an old deck frame? Yes, when the frame is sound. We check joist size and spacing, post bases and signs of rot first. On this deck the 2×8 and 2×10 joists at 16 inches on center were ready for composite after a layer of joist tape. Check out: Should You Replace or Retrofit Your Deck? for more!
Is a deck retrofit cheaper than a new deck? Usually, because the footings, posts and framing stay. You still get all-new boards, railing, stairs and lighting.
Can I mix two TimberTech colors? Yes. Here a darker main color with a lighter accent outlines the fire pit and the drink rail. Ask us for samples to see the pairing in your own light.

Thinking about refreshing your deck?
If your deck frame is solid but the surface is tired, a retrofit may be the fastest way to a new backyard. Contact Core Outdoor Living to set up a site visit, and we will tell you honestly whether your deck is retrofit ready!
